Bitwise select
This instruction sets each bit in the destination SIMD&FP register to the corresponding bit from the first source SIMD&FP register when the original destination bit was 1, otherwise from the second source SIMD&FP register.
Depending on the settings in the CPACR_EL1, CPTR_EL2, and CPTR_EL3 registers, and the current Security state and Exception level, an attempt to execute the instruction might be trapped.
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| 0 | Q | 1 | 0 | 1 | 1 | 1 | 0 | 0 | 1 | 1 | Rm | 0 | 0 | 0 | 1 | 1 | 1 | Rn | Rd | ||||||||||||
| U | opc2 | opcode | |||||||||||||||||||||||||||||
if !IsFeatureImplemented(FEAT_AdvSIMD) then EndOfDecode(Decode_UNDEF); end; let d : integer{} = UInt(Rd); let n : integer{} = UInt(Rn); let m : integer{} = UInt(Rm); let datasize : integer{} = 64 << UInt(Q);
| <Vd> |
Is the name of the SIMD&FP destination register, encoded in the "Rd" field. |
| <T> |
Is an arrangement specifier,
encoded in
|
| <Vn> |
Is the name of the first SIMD&FP source register, encoded in the "Rn" field. |
| <Vm> |
Is the name of the second SIMD&FP source register, encoded in the "Rm" field. |
AArch64_CheckFPAdvSIMDEnabled(); let operand1 : bits(datasize) = V{}(m); let operand2 : bits(datasize) = V{}(d); let operand3 : bits(datasize) = V{}(n); V{datasize}(d) = operand1 XOR ((operand1 XOR operand3) AND operand2);
This instruction is a data-independent-time instruction as described in About PSTATE.DIT.
2026-03_rel 2026-03-26 20:48:11
Copyright © 2010-2026 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.