Atomic signed minimum on byte
This instruction atomically loads an 8-bit byte from memory, compares it against the value held in a register, and stores the smaller value back to memory, treating the values as signed numbers. The value initially loaded from memory is returned in the destination register.
For more information about memory ordering semantics, see Load-Acquire, Store-Release.
For information about addressing modes, see Load/Store addressing modes.
This instruction is used by the alias STSMINB, STSMINLB.
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| 0 | 0 | 1 | 1 | 1 | 0 | 0 | 0 | A | R | 1 | Rs | 0 | 1 | 0 | 1 | 0 | 0 | Rn | Rt | ||||||||||||
| size | VR | o3 | opc | ||||||||||||||||||||||||||||
if !IsFeatureImplemented(FEAT_LSE) then EndOfDecode(Decode_UNDEF); end; let s : integer{} = UInt(Rs); let t : integer{} = UInt(Rt); let n : integer{} = UInt(Rn); let acquire : boolean = A == '1' && Rt != '11111'; let release : boolean = R == '1'; let tagchecked : boolean = n != 31;
| <Ws> |
Is the 32-bit name of the general-purpose register holding the data value to be operated on with the contents of the memory location, encoded in the "Rs" field. |
| <Wt> |
Is the 32-bit name of the general-purpose register to be loaded, encoded in the "Rt" field. |
| <Xn|SP> |
Is the 64-bit name of the general-purpose base register or stack pointer, encoded in the "Rn" field. |
| Alias | Is preferred when |
|---|---|
| STSMINB, STSMINLB | A == '0' && Rt == '11111' |
var address : bits(64); let privileged : boolean = PSTATE.EL != EL0; let accdesc : AccessDescriptor = CreateAccDescAtomicOp(MemAtomicOp_SMIN, acquire, release, tagchecked, privileged, t, s); if n == 31 then CheckSPAlignment(); address = SP{64}(); else address = X{64}(n); end; let comparevalue : bits(8) = ARBITRARY : bits(8); // Irrelevant when not executing CAS let value : bits(8) = X{8}(s); let data : bits(8) = MemAtomic{}(address, comparevalue, value, accdesc); if t != 31 then X{32}(t) = ZeroExtend{32}(data); end;
This instruction is a data-independent-time instruction as described in About PSTATE.DIT.
2026-03_rel 2026-03-26 20:48:11
Copyright © 2010-2026 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.