Multiply-subtract (predicated)
This instruction multiplies the active elements of the first source vector by the corresponding elements of the second source vector, and subtracts the result from elements of the third source (addend) vector. The results are destructively placed in the destination and third source (addend) vector. Inactive elements in the destination vector register remain unmodified.
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | size | 0 | Zm | 0 | 1 | 1 | Pg | Zn | Zda | |||||||||||||||
| op | |||||||||||||||||||||||||||||||
if !IsFeatureImplemented(FEAT_SVE) && !IsFeatureImplemented(FEAT_SME) then EndOfDecode(Decode_UNDEF); end; let esize : integer{} = 8 << UInt(size); let g : integer = UInt(Pg); let n : integer = UInt(Zn); let m : integer = UInt(Zm); let da : integer = UInt(Zda); let sub_op : boolean = TRUE;
| <Zda> |
Is the name of the third source and destination scalable vector register, encoded in the "Zda" field. |
| <T> |
Is the size specifier,
encoded in
|
| <Pg> |
Is the name of the governing scalable predicate register P0-P7, encoded in the "Pg" field. |
| <Zn> |
Is the name of the first source scalable vector register, encoded in the "Zn" field. |
| <Zm> |
Is the name of the second source scalable vector register, encoded in the "Zm" field. |
CheckSVEEnabled(); let VL : integer{} = CurrentVL(); let PL : integer{} = VL DIV 8; let elements : integer = VL DIV esize; let mask : bits(PL) = P{}(g); let operand1 : bits(VL) = if AnyActiveElement{PL}(mask, esize) then Z{VL}(n) else Zeros{VL}; let operand2 : bits(VL) = if AnyActiveElement{PL}(mask, esize) then Z{VL}(m) else Zeros{VL}; let operand3 : bits(VL) = Z{}(da); var result : bits(VL); for e = 0 to elements-1 do if ActivePredicateElement{PL}(mask, e, esize) then let element1 : integer = UInt(operand1[e*:esize]); let element2 : integer = UInt(operand2[e*:esize]); let product : integer = element1 * element2; if sub_op then result[e*:esize] = operand3[e*:esize] - product; else result[e*:esize] = operand3[e*:esize] + product; end; else result[e*:esize] = operand3[e*:esize]; end; end; Z{VL}(da) = result;
This instruction is a data-independent-time instruction as described in About PSTATE.DIT.
This instruction might be immediately preceded in program order by a MOVPRFX instruction. The MOVPRFX must conform to all of the following requirements, otherwise the behavior of the MOVPRFX and this instruction is CONSTRAINED UNPREDICTABLE:
2026-03_rel 2026-03-26 20:48:11
Copyright © 2010-2026 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.