FCMLA (by element)

Floating-point Complex Multiply Accumulate (by element).

This instruction operates on complex numbers that are represented in SIMD&FP registers as pairs of elements, with the more significant element holding the imaginary part of the number and the less significant element holding the real part of the number. Each element holds a floating-point value. It performs the following computation on complex numbers from the first source register and the destination register with the specified complex number from the second source register:

• Considering the complex number from the second source register on an Argand diagram, the number is rotated counterclockwise by 0, 90, 180, or 270 degrees.
• The two elements of the transformed complex number are multiplied by:
  • The real element of the complex number from the first source register, if the transformation was a rotation by 0 or 180 degrees.
  • The imaginary element of the complex number from the first source register, if the transformation was a rotation by 90 or 270 degrees.
• The complex number resulting from that multiplication is added to the complex number from the destination register.

The multiplication and addition operations are performed as a fused multiply-add, without any intermediate rounding.

This instruction can generate a floating-point exception. Depending on the settings in FPCR, the exception results in either a flag being set in FPSR or a synchronous exception being generated. For more information, see Floating-point exception traps.

Depending on the settings in the CPACR_EL1, CPTR_EL2, and CPTR_EL3 registers, and the current Security state and Exception level, an attempt to execute the instruction might be trapped.

Vector
(FEAT_FCMA)

if !IsFeatureImplemented(FEAT_FCMA) then UNDEFINED; if size == '00' || size == '11' then UNDEFINED; if !IsFeatureImplemented(FEAT_FP16) && size == '10' then UNDEFINED; if size == '10' && (L == '1' || Q == '0') then UNDEFINED; if size == '01' && H == '1' && Q == '0' then UNDEFINED; integer d = UInt(Rd); integer n = UInt(Rn); integer m = UInt(M:Rm); integer index; if size == '01' then index = UInt(H:L); if size == '10' then index = UInt(H); constant integer esize = 8 << UInt(size); constant integer datasize = 64 << UInt(Q); integer elements = datasize DIV esize;