Floating-point Javascript Convert to Signed fixed-point, rounding toward Zero. This instruction converts the double-precision floating-point value in the SIMD&FP source register to a 32-bit signed integer using the Round towards Zero rounding mode, and writes the result to the general-purpose destination register. If the result is too large to be represented as a signed 32-bit integer, then the result is the integer modulo 232, as held in a 32-bit signed integer.
This instruction can generate a floating-point exception. Depending on the settings in FPCR, the exception results in either a flag being set in FPSR or a synchronous exception being generated. For more information, see Floating-point exception traps.
Depending on the settings in the CPACR_EL1, CPTR_EL2, and CPTR_EL3 registers, and the current Security state and Exception level, an attempt to execute the instruction might be trapped.
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | Rn | Rd | ||||||||
sf | S | ftype | rmode | opcode |
integer d = UInt(Rd); integer n = UInt(Rn); if !IsFeatureImplemented(FEAT_JSCVT) then UNDEFINED;
<Wd> |
Is the 32-bit name of the general-purpose destination register, encoded in the "Rd" field. |
<Dn> |
Is the 64-bit name of the SIMD&FP source register, encoded in the "Rn" field. |
CheckFPAdvSIMDEnabled64(); bits(64) fltval; bits(32) intval; bit z; fltval = V[n, 64]; (intval, z) = FPToFixedJS(fltval, FPCR, 32); PSTATE.<N,Z,C,V> = '0':z:'00'; X[d, 32] = intval;
Internal version only: aarchmrs v2023-12_rel, pseudocode v2023-12_rel, sve v2023-12_rel ; Build timestamp: 2023-12-15T16:46
Copyright © 2010-2023 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.