Half-precision floating-point multiply-add long to single-precision (bottom, indexed)
This half-precision floating-point multiply-add long instruction widens the even-numbered half-precision elements in the first source vector and the indexed element from the corresponding 128-bit segment in the second source vector to single-precision format and then destructively multiplies and adds these values without intermediate rounding to the single-precision elements of the destination vector that overlap with the corresponding half-precision elements in the first source vector. This instruction is unpredicated.
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| 0 | 1 | 1 | 0 | 0 | 1 | 0 | 0 | 1 | 0 | 1 | i3h | Zm | 0 | 1 | 0 | 0 | i3l | 0 | Zn | Zda | |||||||||||
| o2 | op | T | |||||||||||||||||||||||||||||
if !HaveSVE2() && !HaveSME() then UNDEFINED; constant integer esize = 32; integer n = UInt(Zn); integer m = UInt(Zm); integer da = UInt(Zda); integer index = UInt(i3h:i3l); boolean op1_neg = FALSE;
| <Zda> |
Is the name of the third source and destination scalable vector register, encoded in the "Zda" field. |
| <Zn> |
Is the name of the first source scalable vector register, encoded in the "Zn" field. |
| <Zm> |
Is the name of the second source scalable vector register Z0-Z7, encoded in the "Zm" field. |
| <imm> |
Is the immediate index, in the range 0 to 7, encoded in the "i3h:i3l" fields. |
CheckSVEEnabled(); constant integer VL = CurrentVL; constant integer PL = VL DIV 8; constant integer elements = VL DIV esize; integer eltspersegment = 128 DIV esize; bits(VL) operand1 = Z[n, VL]; bits(VL) operand2 = Z[m, VL]; bits(VL) operand3 = Z[da, VL]; bits(VL) result; for e = 0 to elements-1 integer segmentbase = e - (e MOD eltspersegment); integer s = 2 * segmentbase + index; bits(esize DIV 2) element1 = Elem[operand1, 2 * e + 0, esize DIV 2]; bits(esize DIV 2) element2 = Elem[operand2, s, esize DIV 2]; bits(esize) element3 = Elem[operand3, e, esize]; if op1_neg then element1 = FPNeg(element1, FPCR); Elem[result, e, esize] = FPMulAddH(element3, element1, element2, FPCR); Z[da, VL] = result;
This instruction might be immediately preceded in program order by a MOVPRFX instruction. The MOVPRFX instruction must conform to all of the following requirements, otherwise the behavior of the MOVPRFX and this instruction is unpredictable:
Internal version only: aarchmrs v2023-12_rel, pseudocode v2023-12_rel, sve v2023-12_rel ; Build timestamp: 2023-12-15T16:46
Copyright © 2010-2023 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.