Load-Acquire Register derives an address from a base register value, loads a 32-bit word or 64-bit doubleword from memory, and writes it to a register. The instruction also has memory ordering semantics as described in Load-Acquire, Store-Release. For information about memory accesses, see Load/Store addressing modes.
For this instruction, if the destination is WZR/XZR, it is impossible for software to observe the presence of the acquire semantic other than its effect on the arrival at endpoints.
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| 1 | x | 0 | 0 | 1 | 0 | 0 | 0 | 1 | 1 | 0 | (1) | (1) | (1) | (1) | (1) | 1 | (1) | (1) | (1) | (1) | (1) | Rn | Rt | ||||||||
| size | L | Rs | o0 | Rt2 | |||||||||||||||||||||||||||
integer n = UInt(Rn); integer t = UInt(Rt); constant integer elsize = 8 << UInt(size); constant integer regsize = if elsize == 64 then 64 else 32; boolean tagchecked = n != 31;
| <Wt> |
Is the 32-bit name of the general-purpose register to be transferred, encoded in the "Rt" field. |
| <Xn|SP> |
Is the 64-bit name of the general-purpose base register or stack pointer, encoded in the "Rn" field. |
| <Xt> |
Is the 64-bit name of the general-purpose register to be transferred, encoded in the "Rt" field. |
bits(64) address; bits(elsize) data; constant integer dbytes = elsize DIV 8; AccessDescriptor accdesc; accdesc = CreateAccDescAcqRel(MemOp_LOAD, tagchecked); if n == 31 then CheckSPAlignment(); address = SP[]; else address = X[n, 64]; data = Mem[address, dbytes, accdesc]; X[t, regsize] = ZeroExtend(data, regsize);
If PSTATE.DIT is 1, the timing of this instruction is insensitive to the value of the data being loaded or stored.
Internal version only: aarchmrs v2023-12_rel, pseudocode v2023-12_rel, sve v2023-12_rel ; Build timestamp: 2023-12-15T16:46
Copyright © 2010-2023 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.