LDIAPP

Load-Acquire RCpc ordered Pair of registers calculates an address from a base register value and an optional offset, loads two 32-bit words or two 64-bit doublewords from memory, and writes them to two registers. For information on single-copy atomicity and alignment requirements, see Requirements for single-copy atomicity and Alignment of data accesses. The instruction also has memory ordering semantics, as described in Load-Acquire, Load-AcquirePC, and Store-Release, except that:

For information about memory accesses, see Load/Store addressing modes.

Integer
(FEAT_LRCPC3)

313029282726252423222120191817161514131211109876543210
1x011001010Rt2000x10RnRt
sizeLopc2

32-bit post-index (size == 10 && opc2 == 0000)

LDIAPP <Wt1>, <Wt2>, [<Xn|SP>], #8

32-bit (size == 10 && opc2 == 0001)

LDIAPP <Wt1>, <Wt2>, [<Xn|SP>]

64-bit post-index (size == 11 && opc2 == 0000)

LDIAPP <Xt1>, <Xt2>, [<Xn|SP>], #16

64-bit (size == 11 && opc2 == 0001)

LDIAPP <Xt1>, <Xt2>, [<Xn|SP>]

boolean postindex; boolean wback; postindex = opc2<0> == '0'; wback = opc2<0> == '0';

LDIAPP has the same CONSTRAINED UNPREDICTABLE behavior as LDP. For information about this CONSTRAINED UNPREDICTABLE behavior, see Architectural Constraints on UNPREDICTABLE behaviors, and particularly LDP.

Assembler Symbols

<Wt1>

Is the 32-bit name of the first general-purpose register to be transferred, encoded in the "Rt" field.

<Wt2>

Is the 32-bit name of the second general-purpose register to be transferred, encoded in the "Rt2" field.

<Xn|SP>

Is the 64-bit name of the general-purpose base register or stack pointer, encoded in the "Rn" field.

<Xt1>

Is the 64-bit name of the first general-purpose register to be transferred, encoded in the "Rt" field.

<Xt2>

Is the 64-bit name of the second general-purpose register to be transferred, encoded in the "Rt2" field.

Shared Decode

integer offset; integer n = UInt(Rn); integer t = UInt(Rt); integer t2 = UInt(Rt2); constant integer scale = 2 + UInt(size<0>); constant integer datasize = 8 << scale; offset = if opc2<0> == '0' then (2 << scale) else 0; boolean tagchecked = wback || n != 31; boolean rt_unknown = FALSE; boolean wb_unknown = FALSE; if wback && (t == n || t2 == n) && n != 31 then Constraint c = ConstrainUnpredictable(Unpredictable_WBOVERLAPLD); assert c IN {Constraint_WBSUPPRESS, Constraint_UNKNOWN, Constraint_UNDEF, Constraint_NOP}; case c of when Constraint_WBSUPPRESS wback = FALSE; // writeback is suppressed when Constraint_UNKNOWN wb_unknown = TRUE; // writeback is UNKNOWN when Constraint_UNDEF UNDEFINED; when Constraint_NOP EndOfInstruction(); if t == t2 then Constraint c = ConstrainUnpredictable(Unpredictable_LDPOVERLAP); assert c IN {Constraint_UNKNOWN, Constraint_UNDEF, Constraint_NOP}; case c of when Constraint_UNKNOWN rt_unknown = TRUE; // result is UNKNOWN when Constraint_UNDEF UNDEFINED; when Constraint_NOP EndOfInstruction();

Operation

bits(64) address; bits(64) address2; bits(datasize) data1; bits(datasize) data2; constant integer dbytes = datasize DIV 8; AccessDescriptor accdesc = CreateAccDescLDAcqPC(tagchecked); if n == 31 then CheckSPAlignment(); address = SP[]; else address = X[n, 64]; if !postindex then address = GenerateAddress(address, offset, accdesc); if IsFeatureImplemented(FEAT_LSE2) then bits(2*datasize) full_data; accdesc.ispair = TRUE; full_data = Mem[address, 2*dbytes, accdesc]; if BigEndian(accdesc.acctype) then data2 = full_data<(datasize-1):0>; data1 = full_data<(2*datasize-1):datasize>; else data1 = full_data<(datasize-1):0>; data2 = full_data<(2*datasize-1):datasize>; else address2 = GenerateAddress(address, dbytes, accdesc); data1 = Mem[address, dbytes, accdesc]; data2 = Mem[address2, dbytes, accdesc]; if rt_unknown then data1 = bits(datasize) UNKNOWN; data2 = bits(datasize) UNKNOWN; X[t, datasize] = data1; X[t2, datasize] = data2; if wback then if wb_unknown then address = bits(64) UNKNOWN; elsif postindex then address = GenerateAddress(address, offset, accdesc); if n == 31 then SP[] = address; else X[n, 64] = address;

Operational information

If PSTATE.DIT is 1, the timing of this instruction is insensitive to the value of the data being loaded or stored.


Internal version only: aarchmrs v2023-12_rel, pseudocode v2023-12_rel, sve v2023-12_rel ; Build timestamp: 2023-12-15T16:46

Copyright © 2010-2023 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.