Load SIMD&FP Register (PC-relative literal). This instruction loads a SIMD&FP register from memory. The address that is used for the load is calculated from the PC value and an immediate offset.
Depending on the settings in the CPACR_EL1, CPTR_EL2, and CPTR_EL3 registers, and the current Security state and Exception level, an attempt to execute the instruction might be trapped.
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| opc | 0 | 1 | 1 | 1 | 0 | 0 | imm19 | Rt | |||||||||||||||||||||||
| VR | |||||||||||||||||||||||||||||||
integer t = UInt(Rt); if opc == '11' then UNDEFINED; constant integer size = 4 << UInt(opc); bits(64) offset = SignExtend(imm19:'00', 64);
| <St> |
Is the 32-bit name of the SIMD&FP register to be loaded, encoded in the "Rt" field. |
| <label> |
Is the program label from which the data is to be loaded. Its offset from the address of this instruction, in the range +/-1MB, is encoded as "imm19" times 4. |
| <Dt> |
Is the 64-bit name of the SIMD&FP register to be loaded, encoded in the "Rt" field. |
| <Qt> |
Is the 128-bit name of the SIMD&FP register to be loaded, encoded in the "Rt" field. |
bits(64) address = PC64 + offset; bits(size*8) data; CheckFPEnabled64(); AccessDescriptor accdesc = CreateAccDescASIMD(MemOp_LOAD, FALSE, FALSE); data = Mem[address, size, accdesc]; V[t, size*8] = data;
If PSTATE.DIT is 1, the timing of this instruction is insensitive to the value of the data being loaded or stored.
Internal version only: aarchmrs v2023-12_rel, pseudocode v2023-12_rel, sve v2023-12_rel ; Build timestamp: 2023-12-15T16:46
Copyright © 2010-2023 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.