Reverse Bytes reverses the byte order in a 64-bit general-purpose register.
When assembling for Armv8.2, an assembler must support this pseudo-instruction. It is OPTIONAL whether an assembler supports this pseudo-instruction when assembling for an architecture earlier than Armv8.2.
This is a pseudo-instruction of REV. This means:
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| 1 | 1 | 0 | 1 | 1 | 0 | 1 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | Rn | Rd | ||||||||
| sf | S | opcode2 | opc | ||||||||||||||||||||||||||||
| <Xd> |
Is the 64-bit name of the general-purpose destination register, encoded in the "Rd" field. |
| <Xn> |
Is the 64-bit name of the general-purpose source register, encoded in the "Rn" field. |
The description of REV gives the operational pseudocode for this instruction.
If PSTATE.DIT is 1:
Internal version only: aarchmrs v2023-12_rel, pseudocode v2023-12_rel, sve v2023-12_rel ; Build timestamp: 2023-12-15T16:46
Copyright © 2010-2023 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.