Signed saturating Negate. This instruction reads each vector element from the source SIMD&FP register, negates each value, places the result into a vector, and writes the vector to the destination SIMD&FP register. All the values in this instruction are signed integer values.
If overflow occurs with any of the results, those results are saturated. If saturation occurs, the cumulative saturation bit FPSR.QC is set.
Depending on the settings in the CPACR_EL1, CPTR_EL2, and CPTR_EL3 registers, and the current Security state and Exception level, an attempt to execute the instruction might be trapped.
It has encodings from 2 classes: Scalar and Vector
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | size | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | Rn | Rd | |||||||||
| U | opcode | ||||||||||||||||||||||||||||||
integer d = UInt(Rd); integer n = UInt(Rn); constant integer esize = 8 << UInt(size); constant integer datasize = esize; integer elements = 1; boolean neg = (U == '1');
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| 0 | Q | 1 | 0 | 1 | 1 | 1 | 0 | size | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | Rn | Rd | |||||||||
| U | opcode | ||||||||||||||||||||||||||||||
integer d = UInt(Rd); integer n = UInt(Rn); if size:Q == '110' then UNDEFINED; constant integer esize = 8 << UInt(size); constant integer datasize = 64 << UInt(Q); integer elements = datasize DIV esize; boolean neg = (U == '1');
| <V> |
Is a width specifier,
encoded in
|
| <d> |
Is the number of the SIMD&FP destination register, encoded in the "Rd" field. |
| <n> |
Is the number of the SIMD&FP source register, encoded in the "Rn" field. |
| <Vd> |
Is the name of the SIMD&FP destination register, encoded in the "Rd" field. |
| <T> |
Is an arrangement specifier,
encoded in
|
| <Vn> |
Is the name of the SIMD&FP source register, encoded in the "Rn" field. |
CheckFPAdvSIMDEnabled64(); bits(datasize) operand = V[n, datasize]; bits(datasize) result; integer element; boolean sat; for e = 0 to elements-1 element = SInt(Elem[operand, e, esize]); if neg then element = -element; else element = Abs(element); (Elem[result, e, esize], sat) = SignedSatQ(element, esize); if sat then FPSR.QC = '1'; V[d, datasize] = result;
Internal version only: aarchmrs v2023-12_rel, pseudocode v2023-12_rel, sve v2023-12_rel ; Build timestamp: 2023-12-15T16:46
Copyright © 2010-2023 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.