Signed by unsigned integer indexed dot product
The signed by unsigned integer indexed dot product instruction computes the dot product of a group of four signed 8-bit integer values held in each 32-bit element of the first source vector multiplied by a group of four unsigned 8-bit integer values in an indexed 32-bit element of the second source vector, and then destructively adds the widened dot product to the corresponding 32-bit element of the destination vector.
The groups within the second source vector are specified using an immediate index which selects the same group position within each 128-bit vector segment. The index range is from 0 to 3. This instruction is unpredicated.
ID_AA64ZFR0_EL1.I8MM indicates whether this instruction is implemented.
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| 0 | 1 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 0 | 1 | i2 | Zm | 0 | 0 | 0 | 1 | 1 | 1 | Zn | Zda | |||||||||||
| size<1> | size<0> | U | |||||||||||||||||||||||||||||
if (!HaveSVE() && !HaveSME()) || !HaveInt8MatMulExt() then UNDEFINED; constant integer esize = 32; integer index = UInt(i2); integer n = UInt(Zn); integer m = UInt(Zm); integer da = UInt(Zda);
| <Zda> |
Is the name of the third source and destination scalable vector register, encoded in the "Zda" field. |
| <Zn> |
Is the name of the first source scalable vector register, encoded in the "Zn" field. |
| <Zm> |
Is the name of the second source scalable vector register Z0-Z7, encoded in the "Zm" field. |
| <imm> |
Is the immediate index of a 32-bit group of four 8-bit values within each 128-bit vector segment, in the range 0 to 3, encoded in the "i2" field. |
CheckSVEEnabled(); constant integer VL = CurrentVL; constant integer PL = VL DIV 8; constant integer elements = VL DIV esize; constant integer eltspersegment = 128 DIV esize; bits(VL) operand1 = Z[n, VL]; bits(VL) operand2 = Z[m, VL]; bits(VL) operand3 = Z[da, VL]; bits(VL) result; for e = 0 to elements-1 integer segmentbase = e - (e MOD eltspersegment); integer s = segmentbase + index; bits(esize) res = Elem[operand3, e, esize]; for i = 0 to 3 integer element1 = SInt(Elem[operand1, 4 * e + i, esize DIV 4]); integer element2 = UInt(Elem[operand2, 4 * s + i, esize DIV 4]); res = res + element1 * element2; Elem[result, e, esize] = res; Z[da, VL] = result;
This instruction might be immediately preceded in program order by a MOVPRFX instruction. The MOVPRFX instruction must conform to all of the following requirements, otherwise the behavior of the MOVPRFX and this instruction is unpredictable:
Internal version only: aarchmrs v2023-12_rel, pseudocode v2023-12_rel, sve v2023-12_rel ; Build timestamp: 2023-12-15T16:46
Copyright © 2010-2023 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.